基本介绍

彭康，男，陕西咸阳人。2010年毕业于西北工业大学材料学院，获工学学士学位，2012年毕业与哈尔滨工业大学材料学院，获工学硕士学位，2018年毕业于哈尔滨工业大学材料学院，获工学博士学位。先后承担或参与中核集团领创科研项目、江苏核电及秦山核电等单位焊接与修复横向课题、大型先进压水堆核电站重大专项中国先进核电标准体系研究子课题、船厂高强钢焊接课题等，发表SCI论文5篇。

主要工作经历

2012.08-2013.11 西部超导材料科技股份有限公司；

2018.07-2021.06 中国核动力研究设计院；

2021.07至今 温州大学机电工程学院

学术成果

1.Kang Peng, Chunli Yang, Sanbao Lin, et al. Effect of arc distance on HAZ thermal cycles and microstructural evolution 10CrNi3MoV steel. The International Journal of Advanced Manufacturing Technology. 2017, 90(9-12): 3387-3395. 

2.Kang Peng, Chunli Yang, Sanbao Lin, et al. Thermal cycles and its effect on HAZ microstructure and mechanical properties of 10CrNi3MoV steel in double-sided double arc welding. The International Journal of Advanced Manufacturing Technology. 2017, 93(1-4): 967-974. 

3. Kang Peng, Chunli Yang, Chenglei Fan, et al. Microstructure and mechanical properties of simulated unaltered coarse grained heat affected zones of 10CrNi3MoV steel by double-sided double arc welding. Journal of Materials Processing Technology. 2018, 251: 225-231. 

4.Kang Peng, Chunli Yang, Chenglei Fan, et al. In situ observation and electron backscattered diffraction analysis of granular bainite in simulated heat-affected zone of high-strength low-alloy steel. Science and Technology of Welding and Joining. 2018, 25(3): 158-163. 

5.Kang Peng, Chunli Yang, Chenglei Fan, et al. Thermal process, microstructure and mechanical properties near weld toe in double-sided double gas tungsten arc backing welding joint of 10CrNi3MoV steel. The International Journal of Advanced Manufacturing Technology. 2018, 96(1-4): 677-684.